Skip to content
icemakersale

Home › Guides › Descale a GE Opal 2.0

How to descale a GE Opal 2.0

Scale is the main reason Opals slow down or stop making ice. Descaling takes about an hour of mostly waiting.

By Kevin Marsh. Updated .

Quick answer

GE recommends descaling many Opal models every two to three weeks, depending on water hardness. Fill the reservoir to the max line with white vinegar (newer instructions call for hot vinegar at 100 to 120°F) or the Opal cleaning kit, start the clean cycle, run up to three cycles, then drain and run three rinse cycles with fresh water.

Step by step

Always unplug the ice maker and empty the basket before cleaning. Follow your owner's manual where it differs from these steps.

  1. Turn off, unplug, empty the bin.
  2. Fill with descaler: white vinegar to the max line, or GE Profile Opal Cleaning Kit mixed as directed.
  3. Start the clean cycle and run up to three cycles.
  4. Drain and run three rinse cycles with fresh water.
  5. Return to ice mode.

Full weekly cleaning steps: how to clean a GE Opal.

Signs it needs descaling

  • Slower ice or smaller nuggets.
  • White crust on the reservoir or sensors.
  • The Opal stops making ice; see GE Opal not making ice.

Questions people ask

How often should I descale my Opal 2.0?

GE suggests every two to three weeks on many models, depending on water hardness.

Sources

  1. GE Appliances, Opal cleaning and descaling

Read next