Skip to content
icemakersale

Home › Guides › How to clean a GE Opal

How to clean a GE Opal ice maker

The Opal needs regular cleaning to keep its ice tasting fresh. Here is GE's process, step by step.

By Kevin Marsh. Updated .

Quick answer

GE recommends cleaning the Opal once a week. To descale, fill the reservoir with white vinegar to the max fill line (newer models call for hot vinegar, 100 to 120°F) or use the Opal cleaning kit, then run up to three cleaning cycles. Wipe the sensors with vinegar, drain, and run three rinse cycles with fresh water. Steps vary by model, so check whether your Opal has a round button on the front.

Which Opal do you have?

GE publishes separate instructions for Opal models with a large round button on the front and those without one, plus dispenser models. The steps below follow GE's common process; your owner's manual has the exact button sequence.

Step by step

  1. Turn off and unplug. For models with a round front button, GE says to unplug and let the Opal sit for an hour before cleaning.
  2. Fill with vinegar or the cleaning kit. Fill the reservoir to the max fill line with white vinegar. Newer instructions call for hot vinegar at 100 to 120°F. Or mix GE's Opal Cleaning Kit with hot water as directed.
  3. Run the cleaning cycle. On many models, press and hold the Clean button for three seconds. Some models use a mode switch on the back. Run up to three cleaning cycles.
  4. Clean the sensors. Wipe the water sensors with vinegar, then with clean water.
  5. Rinse three times. Drain the vinegar and run three rinse cycles, using fresh water each time.
  6. Wash the bin and tray. Wash the ice bin with a soft cloth and soapy water. Wipe the drip tray dry, since standing water leaves deposits.
  7. Back to ice mode. On models with a rear switch, slide it back to Ice.

How often

GE recommends cleaning the Opal once a week. On models with a round front button, GE recommends descaling every two to three weeks depending on water hardness and how often you make ice. Using the scale-inhibiting filter and filtered water stretches the interval.

What to use

More cleaner options: best ice maker cleaning solutions.

Questions people ask

How do I put my GE Opal in clean mode?

On many models, press and hold the Clean button for three seconds. Some older models use a mode switch on the back. Check your owner's manual.

Can I clean my Opal with vinegar?

Yes. GE's instructions describe filling the reservoir with white vinegar to the max fill line and running up to three cleaning cycles, followed by three rinse cycles.

How often should I descale my GE Opal?

GE recommends descaling every two to three weeks on many models, depending on water hardness.

Sources

  1. GE Appliances, Opal cleaning and descaling (models with no round button)
  2. GE Appliances, Opal cleaning and descaling (models with a round button)
  3. GE Opal 2.0 owner's manual (ManualsLib)

Read next